Digital Salt Density Tester
Introduction:
Digital Salt Density Tester (new type) can be used for measuring the equivalent salt deposit density of insulators, as well as the conductivity and temperature of solutions.
This instrument is a dedicated measuring device for the equivalent salt deposit density of insulators (referred to as "salt density"), complying with the regulations and requirements of GB/T 16434-1996 "Environmental Pollution Classification and External Insulation Selection Standard for High Voltage Overhead Lines, Power Plants, and Substations". The instrument is based on a microcontroller, achieving functions such as automatic range switching and automatic calibration of measurement gears. It features high measurement accuracy, wide range, intuitive readings, and portability, making it especially suitable for field and laboratory use.
Digital Salt Density Tester Product Features
◆ Self-check on system startup, automatic calibration of measurement system, wide measurement range, accurate data, and automatic full-range switching.
◆ Single-knob jog operation, with Chinese prompts displayed during measurement, and backlit display for use in dim environments.
◆ Measurement data can be directly output via printer, and up to 50 sets of data can be stored and uploaded to a computer for management.
◆ Equipped with real-time clock function for effective data management.
◆ Can measure liquid temperature, range: 0～50℃
◆ Can measure liquid conductivity.
Digital Salt Density Tester Product Parameters
◆ Measurement range:
Salt density: 0.0001mg/cm2～9.9999mg/cm2 (based on X-4.5 type insulator)
Temperature measurement: 0℃～50℃
Conductivity measurement: 0～100000μs/cm (standard configuration 1.0 electrode)
◆ Basic error:
Salt density measurement: resolution 0.0001
Full-scale accuracy ±2%
Temperature measurement: resolution 0.1, accuracy ±0.5℃
Conductivity measurement: resolution 0.1μs/cm
Full-scale accuracy ±2%
◆ Power supply: AC 220±10%
◆ Ambient temperature: 0℃～50℃
◆ Volume: 300×280×156mm3
