Desktop|中文
Home About Us Products + News Center Technical Articles Messages Contact Us

Product Details

全自动Dielectric Loss Tester-扬州达瑞

DRJB6000 Six-Phase Microcomputer Relay Protection Tester - Yangzhou Darui Electric Co., Ltd.

Published: 2020-03-01 09:12:24

Views: 2922

Category: Relay Protection Tester

Product Description
DRJB6000 Six-Phase Microcomputer Relay Protection Tester



Adopting dual 12-bit DAC, high-fidelity high-performance linear amplifier, high output accuracy and good waveform, stable performance. It can conveniently test standby power supply automatic switching devices and microcomputer differential protection devices, and provide targeted calibration procedures for various types of relays. The powerful function test software can also provide a complete set of automatic test procedures for microcomputer protection and automatic devices in various calibration and search modes: line protection, differential protection, impedance protection, low frequency, synchronization, standby power supply automatic switching, etc. Various fault simulation programs can truly simulate and replay various actual faults, transient processes, system oscillations, and reclosing action behaviors on site.



1. All technical indicators fully meet the standard of DL/T624-1997 "Technical Conditions for Microcomputer-Based Test Devices for Relay Protection" issued by the Ministry of Electric Power.

2. Stand-alone operation, built-in high-performance industrial computer, main frequency 300--600MHz, memory 512M, hard disk 4--12G, running Windows XP operating system.

3. The first in the domestic industry to adopt imported brushed stainless steel panel and stainless steel keyboard, and also uses touch mouse, overcoming the shortcomings of trackball mouse which is inflexible and easily damaged. It selects an 8.4-inch TFT true color display with a resolution of 800×600, making the overall operation of the stand-alone device convenient and durable.

4. The main control board adopts DSP+FPGA structure, 16-bit DAC output, which can generate a high-density sine wave with 2000 points per cycle for the fundamental wave, greatly improving the waveform quality and the accuracy of the tester.

5. The power amplifier adopts high-fidelity linear power amplifier, which ensures both the accuracy of small current and the stability of large current.

6. USB interface is used to communicate directly with PC, no need for any conversion cable, convenient to use.

7. Can be connected to a laptop for operation. The laptop and the industrial computer use the same software, no need to relearn the operation method.

8. Equipped with GPS synchronization test function. The device can be built-in GPS synchronization card (optional) connected to PC via RS232 port to realize synchronous adjustment test between two testers at different locations.

9. Equipped with independent dedicated DC auxiliary voltage source output, output voltages are 110V (1A) and 220V (0.6A) respectively, to provide DC working power for relays or protection devices that need it.

10. Has software self-calibration function, avoiding the need to open the chassis to adjust potentiometers for calibration, thus greatly improving the stability of accuracy.



1. AC Current Source:

   Amplitude range: 6×(0-30A) Accuracy: 0.2%

   Maximum output of six-phase current in parallel: 180A

   Long-term allowable working current:     10A

   Power: 300VA/phase

   Maximum power of six-phase parallel: 900VA

   Maximum output time of six-phase parallel: 10s

   Frequency range: 0--1000Hz  Accuracy: 0.001Hz

   Harmonic order: 2--20 times    Phase: 0--360° Accuracy: 0.1°

2. DC Current Source:

   Amplitude: 20A/phase  Power: 300VA/phase  Accuracy: 0.2%

3. AC Voltage Source:

   Amplitude range: 6 × (0--125V) Accuracy: 0.2%

   Line voltage range: 0--250V

   Phase voltage/line voltage output power: 70VA/100VA

   Frequency range: 0--1000Hz  Accuracy: 0.001Hz

   Harmonic order: 2--20 times

4. DC Voltage Source:

   Phase voltage output amplitude: 0--±150V  Accuracy: 0.2%

   Line voltage output amplitude: 0--±300V    

WeChat QR Code
💬
💬 Message ✕

Hello! Have you found what you need? Contact us directly online!

Leave a Message for Consultation
Yangzhou Darui Electric Co., Ltd.
主营产品:Dielectric Loss Tester、Transformer Ratio测试仪、Loop Resistance Tester、高压None线核相仪、Insulation Resistance Tester、Partial Discharge Tester、Cable Fault Tester、DC Resistance Tester等。
☎ Phone: 18952707000(关经理)📞 Landline: 0514-88770377✉ Email: 195214804@qq.com
Verification Code
By submitting, you agree to ourTerms of ServiceandPrivacy Policy
🏠 网站Home📞 一键拨号✉ Contact Us