Test Triple Frequency Transformer Device
Product Completeness
1. Current generator main unit One set
2. Product certificate One copy
3. Product instruction manual One copy
Test Triple Frequency Transformer Device Operating Environment
1. Working power supply: 220V or 380V ±10% 50HZ
2. Ambient temperature: —10℃—40℃
Usage Method:
1. Connect the circuit according to the working principle diagram. The transformer casing, control console, etc. must be properly grounded.
2. Connect the power supply, the green indicator light on the control console will light up, then press the start button, the red indicator light will light up, indicating that the current generator is waiting to increase current.
3. Rotate the voltage regulator clockwise evenly to make the output current indication reach the required large current. To ensure test accuracy, a standard ammeter can be connected in series at the instrument terminals.
4. During the test, if any abnormal situation occurs, immediately cut off the power supply, find out the cause, and then conduct the test again.
5. After the test, the voltage regulator must be adjusted back to zero, press the stop button to cut off the power supply; only after cutting off the working power can the test wiring be removed to ensure safety.
Product Aliases
Triple frequency generator, induced voltage triple frequency generator, triple frequency power generator, test triple frequency transformer device, triple frequency induced withstand voltage generator, triple frequency test transformer, triple frequency tester, triple frequency induced withstand voltage tester, voltage transformer frequency multiplier AC withstand voltage tester, frequency multiplier power generator, triple frequency induced voltage generator, triple frequency induced generator, triple frequency high voltage generator, triple frequency voltage generator, electronic triple frequency power generator, triple frequency transformer, induced voltage triple frequency transformer, triple frequency transformer
Product Parameters
◆ Input voltage: Three-phase 380V 50HZ
◆ Output voltage: Single-phase 0～300V/0～500V/0～1000V (continuously adjustable), frequency: 150HZ
◆ Output capacity: 0～1000kvA, harmonic distortion: ＜1%
◆ No-load operation time: ≤5 minutes
◆ Duration of test object under rated voltage: 40 seconds
◆ Load characteristics: resistive, inductive, capacitive all acceptable
